Your Tactical Choice-----Warrior 3S
As the updated version of Warrior 3, Warrior 3S is a do-it-all tactical flashlight that will guide you through any situation.
High Lumen and Throw Range:
Though the basic circuit principle of common flashlights and tactical flashlights is the same, most tactical flashlights are used for military use because they have higher requirements on the performance, stability and environmental adaptability of the flashlight, which are the main differences between the two. And Warrior 3S is well in these aspects. Warrior 3S has a cool white LED paired with a TIR optic lens that delivers up to 2,300 lumens with a max throw of 300 meters, the same as Warrior 3, reaching far into the darkness and illuminating any environment. In the wild or other special environments, the most basic function of a flashlight is lighting, and high lumen and high range are used to judge the strength of the flashlight's lighting function. Olight has been at the forefront of this, which is one of the reasons why customers trust us.
Built-in proximity sensor that drops the brightness level to protect against any nearby objects while turned on high turbo or strobe mode. Care must be taken to prevent accidental and unintended activation of the light while in a pocket or packed away. As a safety improvement, the Warrior 3S now includes a smart proximity sensor to ensure that it does not inadvertently overheat any objects that come too close to the light source while it is on high or turbo mode. The sensor will prevent overheating by automatically dimming the LED and turning it completely off after 1 minute if the lens is obstructed. Please note that the sensor is just installed in the lens. It is also very important to learn and use the “lock-out” feature to further guard against accidentally activating the light. The overall safety performance has been greatly improved by the addition of the smart proximity sensor.
Dual Switches and Remote Switch:
A side switch was designed to select 6 different modes during daily use and a dual-stage tail switch was used for tactical operation. Around the switch, there are 4-level battery and brightness level indicators, which can be read at a single glance. It features 6 output settings that can be selected on demand using the side switch. For tactical operations, the dual-stage tail switch allows quick and easy access to the most important settings such as turbo and strobe. Activating the strobe mode will further disorient an individual with ill intentions, allowing you time to react or remove yourself from that situation. Configuring the tail switch for strobe use is a fairly simple process. While pressing and holding the tail switch, press the side switch. The Warrior 3S should immediately activate the strobe function, then you can release both the tail and side switches. Now your tail switch is configured for strobe mode when you fully press and hold the tail switch. What’s more, the tail cap, an accessory included in the product, is re-engineered to support our optional dual-button magnetic remote switch for mounting on a long setup.
The following features of this light are greatly appreciated. It has fast and effortless charging via the included magnetic charging cable. You simply “snap” the end of the charging cable to the base and plug the other end into a USB charger and you are good to go. You can even use the Olight Omino charging base, but with a lower overall output, it can take a little longer to fully recharge the Warrior 3S. Also handy are the side switch LED indicators for both the battery level as well as the brightness levels. With the MCC3 USB magnetic charging cable, it is easy to charge the included 5000mAh 21700 battery.
The smoother strike bezel and two-way pocket clip make it easy to put in and take out of pockets. Besides, Warrior 3S is extremely powerful, throwing a beam out to almost one thousand feet, which is incredible given its relatively small size. But this light isn’t just a one-trick pony with impressive throw only. It has a great balance of flood, which is perfect for everyday activities like walking the dogs or checking the backyard at night. By keeping one on a charging base close to any doors of your home, you can ensure that it is always ready whenever it is needed. Additionally, attaching it to a pack while on camping or hiking trips is very convenient, giving one quick and easy access to a light that can illuminate everything around and in front of you. The maximum output on the turbo is extremely bright, however, for use around the house or the campsite, the medium setting that delivers a constant 200 lumens for up to 13 continuous hours is generally more than enough for routine tasks and activities.
As a tactical light, the Warrior 3S is very well suited for most high-pressure situations. It has dual switches, with the tail switch being easily accessible, even in the dark. Additionally, it is great having the ability to change the mode of the tail switch to your personal preferences. A full 2,300 lumens on the turbo is plenty bright for any situation, and it is impressive that one can get a full two and a half minutes on the turbo before it steps down. If you are looking for a great tactical light, with lots of lumens and a good mix of flood and throw, look no further than Warrior 3S.