The Six Tips for Your Torches Maintenance!

The Six Tips for Your Torches Maintenance!

Jun 25, 2021, 18:00:00
2169

LogoGiving Tuesday

Every electronic device has its working life. During the process of using, we use it correctly,and maintenance regularly can extend their life. Learning how to maintaining flashlights correct is indispensable common sense as well! Let's take a look at how to take care of the torches? Make your torches more durable!

1. Do not disassemble the torch parts frequently

The torches are installed in a relatively dry and dust-free environment. The frequent opening may cause dust to enter, especially the lamp holder, which will affect the luminous effect. Keep the focus on that there are no tools that use to clean the lamp cup. The more you make it cleaner, the worse the reflective effect will be. If you accidentally contaminate it, please keep the lamp cup intact.

Some parts will loosen with use. Especially the pressure ring at the tail press switch can be screwed tightly by inserting the two feet of tweezers into the hole. All metal parts of the flashlight are not knowing the principle and circuit, should not be disassembled except the tail switch. Otherwise, it may cause unnecessary disconnection.

2. Heat the LED lamp beads

Heat will be higher during the lighting process, so heat dissipation is necessary. A flashlight with good heat dissipation should feel the heat within 1 minute after turn on. The heating part and other parts are relatively even, and the entire metal shell has heat.

If you use the high-end for a long time, please try to keep the flashlight in motion and let the air flowing through the shell take away the heat. Especially in summer or in a confined environment, please pay attention to avoid burns. Generally, the surface will not exceed 55 degrees; in summer sports (such as riding), it will not exceed 50 degrees.

3. Precautions for battery use 

①When using a flashlight, choose according to the voltage and battery requirements of the flashlight. Do not use it indiscriminately to prevent burnout of the circuit board. Don't use batteries of different models and voltages at the same time;

②In use, turn off the flashlight when the brightness of the strong flashlight changes significantly to prevent over-discharge of the battery. If the torches can not be used for a long time, please remove the battery (one month or longer) to avoid chemical corrosion.

③The battery should not work under the condition of high temperature. It needs to be considered with the heat dissipation of the flashlight. A flashlight with poor heat dissipation may cause the local temperature of the battery to be too high, which is also very dangerous.

4. How to maintain the best battery condition

Battery charging and discharging is a cycle. For lithium batteries, we recommend charge when you use them. Do not recharge after using up the battery. It will be charged after one-half of the capacity is used. There is no problem with the charge as you use it. Charging times are a deep cycle, which is recharging after exhaustion. It looks like a deep cycle. However, it cannot look like a deep cycle in the number of charging times.

5. Prevent the battery from being exposed to the sun

An excessively high-temperature environment will increase the internal pressure of the battery and the battery pressure limiting valve will be forced to open automatically. The direct consequence is to increase the battery's water loss. Excessive battery loss will inevitably lead to a decrease in battery activity and accelerate the softening of the plate. Fatal damage such as heat, bulging, deformation, etc. of the surface.

6. Regularly check the battery discharge

During use, if the discharge time drops suddenly, it is very likely that at least one battery in the battery pack has short-circuited phenomena such as broken grids, softening of the plates, and shedding of active materials on the plates. At this time, you should go to a professional battery repair organization for the inspection, repair, and assembly in time.  elaxing riding.

How to Choose a Suitable Torch Light for Outdoors Travel
Seeker 2 Pro, Powerful Multifunction Search Torchlight

Review

0/500